Real Value Safety Consultants

• Good quality MAP 50% powder capable of fighting class A,B,C & Electrical fires
 
•  Unique gauge testing system (UGTS) mechanism.
•  Brass chrome plated valve
 
•  Internally Epoxy polyester and externally pure polyester powder coating
•  Best available Fire ratings in its class.
 
•  Latest BIS approved – (IS 15683:2006) and ISI marked.
•  More flexible EPDM hose with less prone to cracks.
 
•  Tamper seal to detect any mishandling.
•  Anti-corrosive Phosphate treatment of Cylinders.
 
•  Large loop stainless Pull pin.
•  Lever lock for better handling.
 
•  Bar Code labeling for better traceability.
•  Easy to maintain, recharge & service.

•  Good quality MAP 50% powder capable of fighting class A,B,C & Electrical fires
 
•  Unique gauge testing system (UGTS) mechanism.
•  Brass chrome plated valve
 
•  Internally Epoxy polyester and externally pure polyester powder coating
•  Best available Fire ratings in its class.
 
•  Latest BIS approved – (IS 15683:2006) and ISI marked.
•  More flexible EPDM hose with less prone to cracks.
 
•  Tamper seal to detect any mishandling.
•  Anti-corrosive Phosphate treatment of Cylinders.
 
•  Large loop stainless Pull pin.
•  Lever lock for better handling.
 
•  Bar Code labeling for better traceability.
•  Easy to maintain, recharge & service.

•  Good quality MAP 50% powder capable of fighting class A,B,C & Electrical fires
 
•  Unique gauge testing system (UGTS) mechanism.
•  Brass chrome plated valve
 
•  Internally Epoxy polyester and externally pure polyester powder coating
•  Best available Fire ratings in its class.
 
•  Latest BIS approved – (IS 15683:2006) and ISI marked.
•  More flexible EPDM hose with less prone to cracks.
 
•  Tamper seal to detect any mishandling.
•  Anti-corrosive Phosphate treatment of Cylinders.
 
•  Large loop stainless Pull pin.
•  Lever lock for better handling.
 
•  Bar Code labeling for better traceability.
•  Easy to maintain, recharge & service.

•  99.95% Pure Carbon Di Oxide gas.
 
•  Certifications: BIS Approved (IS 2878:2004) & CE certified.
•  Bodies CCOE/PESO approved.
 
•  High quality enamel paint.
•  Brass valve of wheel type with pressure relief discs.
 
•  Shells are Hydro tested to 250 bar.
•  High pressure Wire braided Hose.
 
•  Easy as well more economical to maintain & service.
•  Maximum visibility during Discharge.
 
•  No Electrical Conductivity Back to the operator.
•  No Thermal or Static Shock

•  High quality Hfc236fa Clean Agent Gas.
 
•  Unique gauge testing system (UGTS) mechanism.
•  CE marked , brass chrome plated valve
 
•  Internally Epoxy polyester and externally pure polyester powder coating
•  Welding Procedure approved by TPI with 6G.
 
•  Latest BIS approved – (IS 15683:2006) and ISI marked.
•  Tamper seal to detect any mishandling.
 
•  Anti-corrosive Phosphate treatment of Cylinders.
•  Large loop stainless Pull pin.
 
•  More flexible EPDM hose.
•  Lever lock for better handling.
 
•  Bar Code labeling for better traceability.
•  Easy to maintain, recharge & service.

• High quality Hfc236fa Clean Agent Gas.
 
•  Unique gauge testing system (UGTS) mechanism
•  CE marked , brass chrome plated valve
 
•  Internally Epoxy polyester and externally pure polyester powder coating
•  Welding Procedure approved by TPI with 6G.
 
•  Latest BIS approved – (IS 15683:2006), ISI marked and CE marked.
•  Tamper seal to detect any mishandling.
 
•  Anti-corrosive Phosphate treatment of Cylinders.
•  Large loop stainless Pull pin.
 
•  More flexible EPDM hose.
•  Lever lock for better handling.
 
•  Bar Code labeling for better traceability.
•  Easy to maintain, recharge & service.

•  High quality Hfc236fa Clean Agent Gas.
 
•  Unique gauge testing system (UGTS) mechanism
•  CE marked , brass chrome plated valve
 
•  Internally Epoxy polyester and externally pure polyester powder coating
•  Welding Procedure approved by TPI with 6G.
 
•  Latest BIS approved – (IS 15683:2006), ISI marked and CE marked.
•  Tamper seal to detect any mishandling.
 
•  Anti-corrosive Phosphate treatment of Cylinders.
•  Large loop stainless Pull pin.
 
•  More flexible EPDM hose.
•  Lever lock for better handling.
 
•  Bar Code labeling for better traceability.
•  Easy to maintain, recharge & service.

• High quality MAP 50% Powder.
 
•  Unique gauge testing system (UGTS) mechanism.
•  Brass chrome plated discharge sprinkler.
 
•  Tough Exterior and interior Coating with Pure Polyester (PP) powder.
•  Automatic Detection and Suppression in a single unit.
 
•  Extinguisher shells are 100% factory hydro tested to excess of 35 bar.
•  Expelling Agent UHP (Ultra High Pure) Grade Nitrogen.
 
•  Anti-corrosive Phosphate treated modules.
•  Provides securities in case of emergencies and power failure without power backup.
 
•  Easy as well more economical to maintain, service and re chargeable.
•  Bar Code labeling for better traceability.

• High quality MAP 50% Powder.
 
•  Unique gauge testing system (UGTS) mechanism.
•  Brass chrome plated discharge sprinkler.
 
•  Tough Exterior and interior Coating with Pure Polyester (PP) powder.
•  Automatic Detection and Suppression in a single unit.
 
•  Extinguisher shells are 100% factory hydro tested to excess of 35 bar.
•  Expelling Agent UHP (Ultra High Pure) Grade Nitrogen.
 
•  Anti-corrosive Phosphate treated modules.
•  Provides securities in case of emergencies and power failure without power backup.
 
•  Easy as well more economical to maintain, service and re chargeable.
•  Bar Code labeling for better traceability.

•  Good quality MAP 50% powder capable of fighting class A,B,C & Electrical fires
 
•  Unique gauge testing system (UGTS) mechanism.
•  Brass chrome plated valve
 
•  Internally Epoxy polyester and externally pure polyester powder coating
•  Best available Fire ratings in its class.
 
•  Latest BIS approved – (IS 15683:2006) and ISI marked.
•  More flexible EPDM hose with less prone to cracks.
 
•  Tamper seal to detect any mishandling.
•  Anti-corrosive Phosphate treatment of Cylinders.
 
•  Large loop stainless Pull pin.
•  Lever lock for better handling.
 
•  Bar Code labeling for better traceability.
•  Easy to maintain, recharge & service.

•  l Conformity to IS 16018:2012
 
•  l BIS Approved and ISI marked
•  l Hydraulically tested as per standard and passed through anti-corrosive treatment
 
•  l High quality Pure Polyester (PP) powder coating (UV Resistant)
•  l Brass caps, drain plugs, ball valve conforms to IS:319
 
•  l Aluminum alloy nozzle conforms to IS:617
•  l Controllable discharge
 
•  l Easy to maintain, recharge & service
•  l PVC braided discharge hose
 
•  l MAP Mono Ammonium Phosphate 50% dry chemical powder confronts to IS 14609 capable of fighting against class A, B, C & Electrically started fires.

•  RO Processed / Distilled water.
 
•  Manufactured of durable high quality materials.
•  Certifications: BIS Approved (IS 15683:2006) & CE certified (will be marked on demand)
 
•  High quality corrosion resistant and impact resistant Pure Polyester (PP) powder coating externally.
•  Plastic Lining done internally. 
 
•  CO2 gas cartridges confirmed to IS 4947.
•  Tough Exterior and interior Coating with Pure Polyester (PP) powder.
 
•  Controlled discharge through Brass nickel plated Valve with squeeze operation.
•  Plastic bottom cases.
 
•  EPDM hose.
•  Large loop Stainless steel Pull pin.
 
•  Extinguisher shells are 100% factory hydro tested to excess of 35 bar.
•  Easy as well more economical to maintain, service and re chargeable.
 
•  Bar coded labels.

•  RO Processed / Distilled water.
 
•  Manufactured of durable high quality materials.
•  Certifications: BIS Approved (IS 15683:2006) & CE certified (will be marked on demand)
 
•  High quality corrosion resistant and impact resistant Pure Polyester (PP) powder coating externally.
•  Plastic Lining done internally. 
 
•  CO2 gas cartridges confirmed to IS 4947.
•  Tough Exterior and interior Coating with Pure Polyester (PP) powder.
 
•  Controlled discharge through Brass nickel plated Valve with squeeze operation.
•  Plastic bottom cases.
 
•  EPDM hose.
•  Large loop Stainless steel Pull pin.
 
•  Extinguisher shells are 100% factory hydro tested to excess of 35 bar.
•  Easy as well more economical to maintain, service and re chargeable.
 
•  Bar coded labels.

• Chemours make UL Listed FE 36 Clean Agent Gas with Zero ODP 
 
•  Unique gauge testing system (UGTS) mechanism
•  CE marked , brass chrome plated valve
 
•  Internally Epoxy polyester and externally pure polyester powder coating
•  Best available Fire ratings in its class.
 
•  Helium Leak detection tested for leakage, leak rate upto 1X10-8 mbar.l/sec.
•  Welding Procedure approved by TPI with 6G.
 
•  Latest BIS approved – (IS 15683:2006), ISI marked and CE marked.
•  Tamper seal to detect any mishandling.
 
•  Anti-corrosive Phosphate treatment of Cylinders.
•  Large loop stainless Pull pin
 
•  More flexible EPDM hose.
•  Lever lock for better handling.
 
•  Bar Code labeling for better traceability.
•  Easy to maintain, recharge & service.

• • KANEX 4 KG CLEAN AGENT FIRE EXTINGUISHER (FE 36 BASED PORTABLE STORED PRESSURE)
• Chemours make UL Listed FE 36 Clean Agent Gas with Zero ODP 
 
•  Unique gauge testing system (UGTS) mechanism
•  CE marked , brass chrome plated valve
 
•  Internally Epoxy polyester and externally pure polyester powder coating
•  Best available Fire ratings in its class.
 
•  Helium Leak detection tested for leakage, leak rate upto 1X10-8 mbar.l/sec.
•  Welding Procedure approved by TPI with 6G.
 
•  Latest BIS approved – (IS 15683:2006), ISI marked and CE marked.
•  Tamper seal to detect any mishandling.
 
•  Anti-corrosive Phosphate treatment of Cylinders.
•  Large loop stainless Pull pin
 
•  More flexible EPDM hose.
•  Lever lock for better handling.
 
•  Bar Code labeling for better traceability.
•  Easy to maintain, recharge & service.

• Chemours make UL Listed FE 36 Clean Agent Gas with Zero ODP 
 
•  Unique gauge testing system (UGTS) mechanism
•  CE marked , brass chrome plated valve
 
•  Internally Epoxy polyester and externally pure polyester powder coating
•  Best available Fire ratings in its class.
 
•  Helium Leak detection tested for leakage, leak rate upto 1X10-8 mbar.l/sec.
•  Welding Procedure approved by TPI with 6G.
 
•  Latest BIS approved – (IS 15683:2006), ISI marked and CE marked.
•  Tamper seal to detect any mishandling.
 
•  Anti-corrosive Phosphate treatment of Cylinders.
•  Large loop stainless Pull pin
 
•  More flexible EPDM hose.
•  Lever lock for better handling.
 
•  Bar Code labeling for better traceability.
•  Easy to maintain, recharge & service.

•  High quality Wet Chemical Agent.
 
•  Unique gauge testing system (UGTS) mechanism
•  Smooth & Polished Stainless Steel body Controlled discharge through Brass nickel plated Valve with squeeze operation.
 
•  Easy to maintain, recharge & service.
•  Latest CE marked.
 
•  Tamper seal to detect any mishandling.
•  Anti-corrosive Phosphate treatment of Cylinders.
 
•  Manufactured of durable high quality materials.
•  Large loop stainless Pull pin.
 
•  More flexible EPDM hose.
•  Lever lock for better handling.
 
•  Bar Code labeling for better traceability.
•  Discharge Nozzle is made up of Aluminum and Design allows a broad, dispersed discharge of agent that delivers a high volume low velocity delivery of wet chemical which doesn’t allow the burning Oil splash.

•  High quality clean agent Hfc236fa gas.
 
•  Unique gauge testing system (UGTS) mechanism.
•  Brass chrome plated discharge sprinkler.
 
•  Tough Exterior and interior Coating with Pure Polyester (PP) powder.
•  Automatic Detection and Suppression in a single unit.
 
•  Extinguisher shells are 100% factory hydro tested to excess of 35 bar.
•  Expelling Agent UHP (Ultra High Pure) Grade Nitrogen.
 
•  Anti-corrosive Phosphate treated modules.
•  Provides securities in case of emergencies and power failure without power backup
 
•  Easy as well more economical to maintain, service and re chargeable.
•  Bar Code labeling for better traceability.

• High quality clean agent Hfc236fa gas.
 
•  Unique gauge testing system (UGTS) mechanism.
•  Brass chrome plated discharge sprinkler.
 
•  Tough Exterior and interior Coating with Pure Polyester (PP) powder.
•  Automatic Detection and Suppression in a single unit.
 
•  Extinguisher shells are 100% factory hydro tested to excess of 35 bar.
•  Expelling Agent UHP (Ultra High Pure) Grade Nitrogen.
 
•  Anti-corrosive Phosphate treated modules.
•  Provides securities in case of emergencies and power failure without power backup
 
•  Easy as well more economical to maintain, service and re chargeable.
•  Bar Code labeling for better traceability.

•  High quality clean agent FE-36 gas.
 
•  Unique gauge testing system (UGTS) mechanism.
•  Brass chrome plated discharge sprinkler.
 
•  Tough Exterior and interior Coating with Pure Polyester (PP) powder.
•  Automatic Detection and Suppression in a single unit.
 
•  Extinguisher shells are 100% factory hydro tested to excess of 35 bar.
•  Expelling Agent UHP (Ultra High Pure) Grade Nitrogen.
 
•  Anti-corrosive Phosphate treated modules.
•  Provides securities in case of emergencies and power failure without power backup
 
•  Easy as well more economical to maintain, service and re chargeable.
•  Bar Code labeling for better traceability.
 
•  Best available Fire ratings in its class with 5 years warranty.

• LITHIUM - ION BATTERY FIRE EXTINGUISHER 4 L
• Aqueous Vermiculite Dispersion AVD Fire Extinguisher
• AVD Fire Extinguisher agent is an aqueous dispersion of chemically exfoliated vermiculite. It is applied to lithium battery fires as a mist, extinguishing them and preventing the propagation of the fire.
• KANEX Lithium-ion Battery fire extinguisher with AVD agent provides effective lithium battery fire protection to prevent the propagation of heat when applied as a mist. The AVD coating also acts as a fire break. The vermiculite particles within the mist are deposited on the surface of the burning fuel to create a film over the top of the fire.
• The film instantly dries and, because the high aspect ratio platelet particles overlap and bind together, a non-flammable oxygen barrier between the fuel and the atmosphere is produced. This process has a cooling effect on the fuel source and, as the water content in AVD is evaporated, the vermiculite platelets begin to build up and the fire is brought under control.

•  l Conformity to IS 16018:2012
 
•  l BIS Approved and ISI marked
•  l Hydraulically tested as per standard and passed through anti-corrosive treatment
 
•  l High quality Pure Polyester (PP) powder coating (UV Resistant)
•  l Brass caps, drain plugs, ball valve conforms to IS:319
 
•  l Aluminum alloy nozzle conforms to IS:617
•  l Controllable discharge
 
•  l Easy to maintain, recharge & service
•  l PVC braided discharge hose
 
•  l MAP Mono Ammonium Phosphate 50% dry chemical powder confronts to IS 14609 capable of fighting against class A, B, C & Electrically started fires.

•  l Conformity to IS 16018:2012
 
•  l BIS Approved and ISI marked
•  l Hydraulically tested as per standard and passed through anti-corrosive treatment
 
•  l High quality Pure Polyester (PP) powder coating (UV Resistant)
•  l Brass caps, drain plugs, ball valve conforms to IS:319
 
•  l Aluminum alloy nozzle conforms to IS:617
•  l Controllable discharge
 
•  l Easy to maintain, recharge & service
•  l PVC braided discharge hose
 
•  l MAP Mono Ammonium Phosphate 50% dry chemical powder confronts to IS 14609 capable of fighting against class A, B, C & Electrically started fires.

•  High quality clean agent FE-36 gas.
 
•  Unique gauge testing system (UGTS) mechanism.
•  Brass chrome plated discharge sprinkler.
 
•  Tough Exterior and interior Coating with Pure Polyester (PP) powder.
•  Automatic Detection and Suppression in a single unit.
 
•  Extinguisher shells are 100% factory hydro tested to excess of 35 bar.
•  Expelling Agent UHP (Ultra High Pure) Grade Nitrogen.
 
•  Anti-corrosive Phosphate treated modules.
•  Provides securities in case of emergencies and power failure without power backup
 
•  Easy as well more economical to maintain, service and re chargeable.
•  Bar Code labeling for better traceability.
 
•  Best available Fire ratings in its class with 5 years warranty.

•  Welding Procedure (WPS) approved by TPI with 6G certification BIS Approved (IS 15683:2006), ISI marked and CE Certified
 
•  Special Nozzle produce over 22 billion water droplets from only 1 litre of water. These droplets are as small as 25 microns in diameter and create an ultra-fine mist which has superior fire-fighting capabilities. 
•  CE marked, brass chrome plated valve with Controllable discharge mechanism and Large loop Stainless steel Pull pin EPDM Rubber braided hose is far more flexible than the PVC braided hose and also far less prone to cracks
 
•  Internally Plastic coated and Externally Pure Polyester (PP) powder coated (UV Resistant)
•  Unique Gauge Testing System (UGTS) mechanism
 
•  Hydraulically tested as per standard requirements 
•  Anti-corrosive treatment: Semi Automatic Seven tank Hot dipping Phosphate treatment Process
 
•  Helium Leak Detection tested for leakage, leak rate up to 1x10 mbar.l/sec 
•  Easy to maintain, recharge & service 
 
•  AR-AFFF agent confirming IS:4989 (Part-II) capable of fighting against Class A and B fires

•  Welding Procedure (WPS) approved by TPI with 6G certification BIS Approved (IS 15683:2006), ISI marked and CE Certified
 
•  Special Nozzle produce over 22 billion water droplets from only 1 litre of water. These droplets are as small as 25 microns in diameter and create an ultra-fine mist which has superior fire-fighting capabilities. 
•  CE marked, brass chrome plated valve with Controllable discharge mechanism and Large loop Stainless steel Pull pin EPDM Rubber braided hose is far more flexible than the PVC braided hose and also far less prone to cracks
 
•  Internally Plastic coated and Externally Pure Polyester (PP) powder coated (UV Resistant)
•  Unique Gauge Testing System (UGTS) mechanism
 
•  Hydraulically tested as per standard requirements 
•  Anti-corrosive treatment: Semi Automatic Seven tank Hot dipping Phosphate treatment Process
 
•  Helium Leak Detection tested for leakage, leak rate up to 1x10 mbar.l/sec 
•  Easy to maintain, recharge & service 
 
•  AR-AFFF agent confirming IS:4989 (Part-II) capable of fighting against Class A and B fires

• Welding Procedure (WPS) approved by TPI with 6G certification BIS Approved (IS 15683:2006), ISI marked and CE Certified
 
•  Special Nozzle produce over 22 billion water droplets from only 1 litre of water. These droplets are as small as 25 microns in diameter and create an ultra-fine mist which has superior fire-fighting capabilities. 
•  CE marked, brass chrome plated valve with Controllable discharge mechanism and Large loop Stainless steel Pull pin EPDM Rubber braided hose is far more flexible than the PVC braided hose and also far less prone to cracks
 
•  Internally Plastic coated and Externally Pure Polyester (PP) powder coated (UV Resistant)
•  Unique Gauge Testing System (UGTS) mechanism
 
•  Hydraulically tested as per standard requirements 
•  Anti-corrosive treatment: Semi Automatic Seven tank Hot dipping Phosphate treatment Process
 
•  Helium Leak Detection tested for leakage, leak rate up to 1x10 mbar.l/sec 
•  Easy to maintain, recharge & service 
 
•  AR-AFFF agent confirming IS:4989 (Part-II) capable of fighting against Class A and B fires

• High quality clean agent Hfc236fa gas.
 
•  Unique gauge testing system (UGTS) mechanism.
•  Brass chrome plated discharge sprinkler.
 
•  Tough Exterior and interior Coating with Pure Polyester (PP) powder.
•  Automatic Detection and Suppression in a single unit.
 
•  Extinguisher shells are 100% factory hydro tested to excess of 35 bar.
•  Expelling Agent UHP (Ultra High Pure) Grade Nitrogen.
 
•  Anti-corrosive Phosphate treated modules.
•  Provides securities in case of emergencies and power failure without power backup
 
•  Easy as well more economical to maintain, service and re chargeable.
•  Bar Code labeling for better traceability.

•  High quality clean agent FE-36 gas.
 
•  Unique gauge testing system (UGTS) mechanism.
•  Brass chrome plated discharge sprinkler.
 
•  Tough Exterior and interior Coating with Pure Polyester (PP) powder.
•  Automatic Detection and Suppression in a single unit.
 
•  Extinguisher shells are 100% factory hydro tested to excess of 35 bar.
•  Expelling Agent UHP (Ultra High Pure) Grade Nitrogen.
 
•  Anti-corrosive Phosphate treated modules.
•  Provides securities in case of emergencies and power failure without power backup
 
•  Easy as well more economical to maintain, service and re chargeable.
•  Bar Code labeling for better traceability.
 
•  Best available Fire ratings in its class with 5 years warranty.

•  99.95% Pure Carbon Di Oxide gas.
 
•  Certifications: BIS Approved (IS 2878:2004) & CE certified.
•  Bodies CCOE/PESO approved.
 
•  High quality enamel paint.
•  Brass valve of wheel type with pressure relief discs.
 
•  Shells are Hydro tested to 250 bar.
•  High pressure Wire braided Hose.
 
•  Easy as well more economical to maintain & service.
•  Maximum visibility during Discharge.
 
•  No Electrical Conductivity Back to the operator.
•  No Thermal or Static Shock.

KANEX CO2 type Fire Extinguishers are environmentally safe and designed to suppress the fires where Class B, C and Electrically energized fires could occur. CO2 Extinguishers are advisable to use in Indoors where wind and drafts doesn’t affect discharge and where clean medium required which doesn’t leaves residue.

KANEX CO2 type Fire Extinguishers are environmentally safe and designed to suppress the fires where Class B, C and Electrically energized fires could occur. CO2 Extinguishers are advisable to use in Indoors where wind and drafts doesn’t affect discharge and where clean medium required which doesn’t leaves residue.

KANEX CO2 type Fire Extinguishers are environmentally safe and designed to suppress the fires where Class B, C and Electrically energized fires could occur. CO2 Extinguishers are advisable to use in Indoors where wind and drafts doesn’t affect discharge and where clean medium required which doesn’t leaves residue.

AVD Fire Extinguisher agent is an aqueous dispersion of chemically exfoliated vermiculite. It is applied to lithium battery fires as a mist, extinguishing them and preventing the propagation of the fire.

KANEX Lithium-ion Battery fire extinguisher with AVD agent provides effective lithium battery fire protection to prevent the propagation of heat when applied as a mist. The AVD coating also acts as a fire break. The vermiculite particles within the mist are deposited on the surface of the burning fuel to create a film over the top of the fire.

The film instantly dries and, because the high aspect ratio platelet particles overlap and bind together, a non-flammable oxygen barrier between the fuel and the atmosphere is produced. This process has a cooling effect on the fuel source and, as the water content in AVD is evaporated, the vermiculite platelets begin to build up and the fire is brought under control.

• KITCHEN SUPPRESSION SYSTEM
• Pre-Engineered Commercial Kitchen Fire Suppression System
• Rotarex (Brand Name: Firedetec) systems use a proprietary continuous linear sensor tube that reliably detects and actuates release of the extinguishing agent using pneumatic technology. It is more flexible, space efficient and cost effective versus alternative mechanical or electronic systems. It provides simple reliable protection for Kitchen hoods.

1. The flexible Fire Detection Tubing (FDT) is installed directly inside the extractor hood-directly above cooking areas. When a fire occurs, the point on the pressurized FDT nearest the heat source will burst at 175 deg C. The Sudden tube depressurization actuates the special pressure differential valve and instantly floods the cooking area with Class F extinguishing agent. The fire is quickly suppressed just moments after it began... minimizing damage and downtime.

•  High quality MAP 50% Powder.
 
•  Unique gauge testing system (UGTS) mechanism.
•  Brass chrome plated discharge sprinkler.
 
•  Tough Exterior and interior Coating with Pure Polyester (PP) powder.
•  Automatic Detection and Suppression in a single unit.
 
•  Extinguisher shells are 100% factory hydro tested to excess of 35 bar.
•  Expelling Agent UHP (Ultra High Pure) Grade Nitrogen.
 
•  Anti-corrosive Phosphate treated modules.
•  Provides securities in case of emergencies and power failure without power backup.
 
•  Easy as well more economical to maintain, service and re chargeable.
•  Bar Code labeling for better traceability.

•  High quality Wet Chemical Agent.
 
•  Unique gauge testing system (UGTS) mechanism
•  Smooth & Polished Stainless Steel body Controlled discharge through Brass nickel plated Valve with squeeze operation.
 
•  Easy to maintain, recharge & service.
•  Latest CE marked.
 
•  Tamper seal to detect any mishandling.
•  Anti-corrosive Phosphate treatment of Cylinders.
 
•  Manufactured of durable high quality materials.
•  Large loop stainless Pull pin.
 
•  More flexible EPDM hose.
•  Lever lock for better handling.
 
•  Bar Code labeling for better traceability.
•  Discharge Nozzle is made up of Aluminum and Design allows a broad, dispersed discharge of agent that delivers a high volume low velocity delivery of wet chemical which doesn’t allow the burning Oil splash.

AVD Fire Extinguisher agent is an aqueous dispersion of chemically exfoliated vermiculite. It is applied to lithium battery fires as a mist, extinguishing them and preventing the propagation of the fire.

KANEX Lithium-ion Battery fire extinguisher with AVD agent provides effective lithium battery fire protection to prevent the propagation of heat when applied as a mist. The AVD coating also acts as a fire break. The vermiculite particles within the mist are deposited on the surface of the burning fuel to create a film over the top of the fire.

The film instantly dries and, because the high aspect ratio platelet particles overlap and bind together, a non-flammable oxygen barrier between the fuel and the atmosphere is produced. This process has a cooling effect on the fuel source and, as the water content in AVD is evaporated, the vermiculite platelets begin to build up and the fire is brought under control.